|
|
This is the neighbor's gate and metal fencing, whose design we generally copied. (19-Apr-04)dozer
|
|
The gate track is laid in position. (15-Jul-04)dozer
|
|
In the gate is composed of 1 1/2 " square metal frame and vertical 1" square metal bars. The inside circular decorations were bought pre-finished, we use a butterfly and flower design. dozer
|
|
Metal being cut at the same time it is welded by another worker.dozer
|
|
Fitting the gate in place. The metals are painted with a primer first and then painted with a quality oak shade of paint. (23-Jul-04)dozer
|
|
Fitting a wall piece in place. (26-Jul-04)dozer
|
|
Roller mechanism for the gate. There is one metal roller on the outside and one on the inside of the upside down 'U' piece of metal. (29-Jul-04)dozer
|
|
The leaf and design details are finished off in an expensive gold paint (from Italy). There are two coats, a specialty yellow primer and then the gold leaf. (31-Jul-04)dozer
|
|
The gate and metal fencing in place. (13-Aug-04)dozer
|
|
Metal fencing section. (15-Aug-04)dozer
|
|
|
Metal entry door. (22-Aug-04)dozer
|
|
|
|
|
|