happy builder

 Coolthaihouse Photo Gallery

Construction Photos
Home > Original Coolthaihouse Section > Original Coolthaihouse Build > Other

Top rated - Other
DSC00039.jpg
The support post is poured around the adjacent blocks using a form structure. dozer00000
(0 votes)
DSC00037.jpg
Another view of the back wall. dozer00000
(0 votes)
DSC00036.jpg
This is the entry way for the walk in gate. dozer00000
(0 votes)
DSC00035.jpg
Another shot of the blocks. Note, there is a vertical piece of rebar put in place between the blocks close to the post for every block. This metal piece is used to add strength. It is guage 2 hun full and is about 40 cm long.dozer00000
(0 votes)
DSC00034.jpg
To add strength the blocks are cemented in place prior to pouring the supporting posts. The posts will be poured 'around' the blocks. Standard sizes for facing walls is 4 blocks high, the back sides are 7 blocks high. (24-Jan-04) dozer00000
(0 votes)
DSC00033.jpg
Another shot showing the footing with the rebar supports at 2.5 meter intervals. dozer00000
(0 votes)
DSC00032.jpg
The footing will have the rebar supports at 2.5 meter intervals. dozer00000
(0 votes)
DSC00031.jpg
A footing is created about 10 inches high by about 10 cm. wide. Straight form wood is used to form the concrete. The concrete is poured around a metal rebar structure, of 3 hun full (vertical) with 2 hun full (cross supports). (16-Jan-04) dozer00000
(0 votes)
DSC00029.jpg
Cement is poured using a large metal can as a form, about 30 cm square. (13-Jan-04) dozer00000
(0 votes)
DSC00023.jpg
The base is cemented in place with a cement pour around 30 cm thick. dozer00000
(0 votes)
DSC00022.jpg
The wide area show here will be for the entry gate. dozer00000
(0 votes)
DSC00021.jpg
Supporting rebar structures, which are made by tying metal strands together are placed in the completed post hole. There is a metal base on the bottom of the structure. The metal used on the upright pieces is guage 3 hun full, the square supports are 2 hun full. dozer00000
(0 votes)
73 files on 7 page(s) 6

Debug Info 
Debug Output: show / hide