|
Most viewed - Perimeter Wall |
14 viewsThe footing will have the rebar supports at 2.5 meter intervals. dozer
|
|
14 viewsAnother shot of the blocks. Note, there is a vertical piece of rebar put in place between the blocks close to the post for every block. This metal piece is used to add strength. It is guage 2 hun full and is about 40 cm long.dozer
|
|
14 viewsThe support post is poured around the adjacent blocks using a form structure. dozer
|
|
13 viewsPost holes like this are dug each 2.5 meters. The stick at the bottom signifies the center of the fence post to be poured. The hole is 60 cm square, 60 cm deep. (11-Jan-04) dozer
|
|
13 viewsAnother view of the back wall. dozer
|
|
12 viewsSupporting rebar structures, which are made by tying metal strands together are placed in the completed post hole. There is a metal base on the bottom of the structure. The metal used on the upright pieces is guage 3 hun full, the square supports are 2 hun full. dozer
|
|
10 viewsThe wide area show here will be for the entry gate. dozer
|
|
10 viewsCement is poured using a large metal can as a form, about 30 cm square. (13-Jan-04) dozer
|
|
|
|
|
|