|
Most viewed - Perimeter Wall |
22 viewsA footing is created about 10 inches high by about 10 cm. wide. Straight form wood is used to form the concrete. The concrete is poured around a metal rebar structure, of 3 hun full (vertical) with 2 hun full (cross supports). (16-Jan-04) dozer
|
|
22 viewsTo apply decorative tiles around a perimeter wall foundation post, the brick layer creates a rig which sits on top of the post and has 'straight-line' nylon line running down the side. (28-Jun-04)dozer
|
|
21 viewsPainted and finished wall section with decorative metal. (15-Aug-04)dozer
|
|
18 viewsStucco being applied to the perimeter wall.dozer
|
|
18 viewsFinished wall section with some decorative brickwork on the entry posts. (06-Jul-04)dozer
|
|
17 viewsAnother shot showing the footing with the rebar supports at 2.5 meter intervals. dozer
|
|
17 viewsLaying a brick in place.dozer
|
|
17 viewsFinishing touches applied to the top of the perimeter wall foundation post.dozer
|
|
16 viewsTo add strength the blocks are cemented in place prior to pouring the supporting posts. The posts will be poured 'around' the blocks. Standard sizes for facing walls is 4 blocks high, the back sides are 7 blocks high. (24-Jan-04) dozer
|
|
16 viewsA wall section (front and side) with completed support post structures. dozer
|
|
15 viewsThis is the entry way for the walk in gate. dozer
|
|
14 viewsThe base is cemented in place with a cement pour around 30 cm thick. dozer
|
|
|
|
|
|