|
| Last additions - Raise Perimeter Wall Front |
Painting Decorative MetalThis is a shot of partially painted decorative metal. We had a couple of day laborers paint the metal and they actually did a good job. First the old metal was sanded and prepped and my favorite metal paint Glipton TOA 465 was applied. dozerSep 28, 2011
|
|
Topped Beam Decorative Pattern FinishedThe top beam has had the corners rendered in a pattern matching the bottom part of the column.dozerSep 28, 2011
|
|
Welding Security MetalMost of the welding was done prior to putting each section in place (each section being more than 2 meters). Here two adjacent sections are being welded together. dozerSep 28, 2011
|
|
Security Metal affixed to Top of WallThis security metal was fabricated here and then attached via anchor bolts. dozerSep 28, 2011
|
|
Column LightingElectrician preparing to install the lighting on the top of each column. dozerSep 28, 2011
|
|
Another ColumnElectric conduit extends through the top and has been taped. Note the new bricks used to top up the column are the nice decorative ones (3.5 b each) which look much nicer than the ones on the bottom. dozerSep 28, 2011
|
|
Columns are RaisedThe Columns on either side of the Entry door and drive way gate are raised to match the neve level of the wall. Electric conduit extends through the top and has been taped. dozerSep 28, 2011
|
|
Close up of the finished beamdozerSep 28, 2011
|
|
Smoothing the Underside of the BeamdozerSep 28, 2011
|
|
Edging the Upper BeamAfter the beam has set now it is being cornered. dozerSep 28, 2011
|
|
Fabricating Security MetalThe security metal will be bolted on top of the finished wall. dozerSep 28, 2011
|
|
Electric to Extrude through ColumnsThe level of the original electric will be raised since the columns is being extended upwards.dozerSep 28, 2011
|
|
|
|
|
|
|
