|
|
Metal platesAfter a few hours of searching, a metal shop that had the appropriate steel was found.Max&Bee-in-CM
|
|
Rebar in pipesMeasure out the size to make sure the rebar squares fit tight.Max&Bee-in-CM
|
|
Measure inside diameterThe inside diameter of the concrete pipes are measured in order to build a rebar cage of the appropriate size.Max&Bee-in-CM
|
|
DeliveryThe concrete pipes are delivered to site. No cost for delivery.Max&Bee-in-CM
|
|
Found the pipesConcrete pipes are needed in order to build a pier to mount the telescope. Appropriate concrete pipes were found at the local cement/pip shop. Each pipe is 1 metre long, with an inside diameter of 28 cm. Cost per pipe is 280 baht. I bought 3, and the delivery van followed us to site.Max&Bee-in-CM
|
|
Building the rebar frameA fame 3 metre high is build for the telescope pierMax&Bee-in-CM
|
|
|
Making boltsCutting the bolts to size - 20 cm for the bolts that will go into the concrete to hold metal plates, and 15 cm bolts to connect the metal plates together.Max&Bee-in-CM
|
|
The metal ladyThe local very friendly and helpful metal shop lady. Total cost to cut 3 metal plates (30 cm X 30 cm), and the long bolts and 20 nuts was 1360 baht.Max&Bee-in-CM
|
|
Metal rodsThe rods that will be used to secure the 30 cm X 30 cm metal plates to the concrete pier and each other. They will need to be cut to size.Max&Bee-in-CM
|
|
Hole #2The second hole is dug out by hand, size is 1 m cubed.Max&Bee-in-CM
|
|
Hole #1 closedThe soil people mistakenly dumped soil and closed the hole dug for the pier.Max&Bee-in-CM
|
|
|
|
|
|