Old MetalThe old metal being prepared for the scrap man at 10 b per kilo. dozer (0 votes)
Original WallThe original side wall being raised. dozer (0 votes)
Pump HouseThe original pump house with raw water filtration (from a hand dug well) and single pump. The corrugated roof tiles are also visible with the extruding screws. dozer (0 votes)
Original Finish Paint Coat RedoneThe original paint coat used TOA Glipton oil based paint but was cut too much with thinner or turpentine. Here the surface is being roughed to apply a new coat. dozer (0 votes)
Sheeting Riveted into PlaceThe sheeting is riveted into place. dozer (0 votes)
Backside of the Pump House RoofThe two pieces of metal are laid in place with the joint on the back side. dozer (0 votes)
Metal BentHere the metal is bent to the specified angle. This angle forms the apex of the roof. dozer (0 votes)
Metal Bending MachingHere the metal sheet is inserted into the bending machine to get the angle specified. dozer (0 votes)
Metal WorkshopWe were replacing the corrugated roof sheets with metal sheets 1mm thick purchased from the steel shop. The metal will be bent to form the apex of the roof. The metal needs to be cut to size as it is too thick to cut easily on site. dozer (0 votes)
Too Bulky for Limited SpaceThe space was limited and the sheets got in the way of the satellite dish. dozer (0 votes)