happy builder

 Coolthaihouse Photo Gallery

Construction Photos
Most viewed
IMG_1806.jpg
Mains Electric67 viewsPulling up the mains electric as it will route to the control panel through the underground conduit. dozer
IMG_2507.jpg
Configuring the Floor Electric67 viewsLaying out the location of the floor electric pop up electric boxes which will be in the study area of the house. dozer
DSCN0416.jpg
Weather Proof Switch Boxes67 viewsThese are bticino weather proof switch boxes used on the exterior. dozer
IMG_1693.jpg
Setting Up the Pump67 viewsBefore getting too far the pump needs to be set up for so the inbound lines can be pressure tested. Any problems can be checked/fixed before concrete is poured over any piping. dozer
IMG_1934.jpg
Vent Pipes67 viewsVend pipes extending upwards, eventually routed through the roof tiles. Venting into the attic space is not a good move as it creates a possible odor problem. dozer
DSCN0482.jpg
Study67 viewsThe study area utilizes walls that are 20 cm think so there is no column footprint visible. dozer
IMG_9044.jpg
Septic Service Opening67 viewsThis shows the type of opening used for the 3 septic collections within the system. It is a threaded 6 inch brass lid fitted into a heavy PVC shell. This will be placed on top of the 4.5 inch hole in the lid of the concrete rings. dozer
IMG_9132.jpg
Sika Water Proofer67 viewsSika 'gan sum' waterproofing agent is added to the concrete mix.dozer
IMG_9385.jpg
Kitchen Painting67 viewsThe kitchen being painted. The paint used was super shield (both primer and the finish coat). The kitchen and bathroom are semi gloss (washable) while the rest of the house are done in matte. dozer
IMG_9468.jpg
Counter Tiles67 viewsThe kitchen cabinet tiles are off white tiles spaced at 3 mm intervals. dozer
IMG_9724.jpg
Removal of Plastic Sheeting67 viewsThis stuff is great, look, no spots!dozer
IMG_9659.jpg
Granito Tiles67 viewsThe granito tiles used in the front room and thicker and heavier than normal ceramic tiles. dozer
7141 files on 596 page(s) 287

Debug Info 
Debug Output: show / hide