|
Most viewed |
Foundation holes92 viewsQuite deep, the main holes are 2 m deepMax&Bee-in-CM
|
|
nice view, better than pic92 viewswill do large window hereotis-a
|
|
|
Last day working on the roof metal - finishing touches92 viewsMaking the welds strongerMax&Bee-in-CM
|
|
|
Wire Mesh92 viewsClose up of wire mesh which is affixed using a nail and washer. It is used near the corner to keep cracking and separation problems to a minimum. dozer
|
|
Electric Switch Diagram92 viewsOne of the electric diagrams showing an overview of the switch scheme, there we also detail diagrams for switches and another set for plugs. dozer
|
|
Double Box Sections92 viewsThe exterior of the roof structure was done with double box sections of 3.2mm 2x4.dozer
|
|
Wood Trim for Ceiling Finish92 viewsThese teak wood trim pieces have a 90 % fitting to allow them to be easily applied to a corner, as in this application. They are lacquered with several coats prior to being affixed in place. At the joints a matching 45 % cut is made so they but up to each other with no joint being apparent. dozer
|
|
Aluminum Door Installation92 viewsThe doors are installed in the pre measured opening. If there is any modification needed to the opening it is done by the aluminum window installers. dozer
|
|
Laying Aerated Block92 viewsAerated blocks are not mortared in a convention sense. They are basically glued together (using the designated product) and kept secure by tying them into the columns with 6mm rebar which has been drilled into the column. A groove is cut in the block to hold the rebar in place. dozer
|
|
More soffit structure + facia92 viewsShows the soffit structure including the cross sections and also the facia boards. dozer
|
|
7141 files on 596 page(s) |
|
|
|
|
|
219 | |
|
|
|
|
|
|
|