|
| Last additions |
Locking door knobsStandard Thai style locking doors knobs. These cost 250 baht from HomePro. There are cheaper ones, and I have seen cheaper ones installed in multi-million luxury homes in developments on Samui.jazzmanFeb 11, 2009
|
|
HingesSold in pack of four. Not the very cheapest but far from luxury, these cost 199 baht per pack at HomePro.
We install three per door.jazzmanFeb 11, 2009
|
|
DoorsQuite heavy and sturdy, these exterior doors are made of strong, hot pressed fibre-board to give the panel shapes. 550 baht each from HomePro. Cheap and easy to replace if they get kicked in - worth thinking about if you are building a motel or bungalows. The wooden frames (not shown) were bought at GlobalHouse, 590 baht each, made of Mai Deng.jazzmanFeb 11, 2009
|
|
Window winderWinder for louvre type windows. Nothing like the heavy duty quality die-cast used on our kitchen window. These cost 35 baht each from the local hardware store; better ones can cost 80 - 150 baht.jazzmanFeb 11, 2009
|
|
Day 7Most of the walls are built, except the font ones that will have the doors and windows. Still some steel to be put in the roof. The workers chop and change what they are doing, but I let them get on with it. I can watch everything from my office window only 20m away.jazzmanFeb 11, 2009
|
|
Day 8More progress on the walls. The 7 cm thick concrete floors have been laid in three of the rooms and the pits for the septic tanks have been dug. Wire mesh reinforcing was laid in the concrete.jazzmanFeb 11, 2009
|
|
Window framesWooden (Mai Deng) window frames for louvre type windows. 1 x 1.2 m. 700 baht each from local village hardware store. There were some cheaper ones but I decided to go for the better wood with a better finish - I worry about wood warping in the rainy season. These will be sanded, primed, and painted off-white to match the doors and door frames.jazzmanFeb 11, 2009
|
|
Louvre mechanismThese cost 145 per pair complete with aluminium strips (not shown) for the interior of the window frames. Again, not comparable with the heavy duty mechanisms on the aluminium kitchen window. The louvres will be of plain 4 mm glass with non-ground edges.jazzmanFeb 11, 2009
|
|
8 February 2009A long view of the site as it looked today.pklongballFeb 08, 2009
|
|
Overview Front We are almost ready to pour the CPAC concrete floor and end phase one of the build.pklongballFeb 08, 2009
|
|
Mrs PK the "Supervisor"Sunday, Feb 8, 2009 Almost all of the sub-floor precast panels are in place. The builder's order was about 15 panels short. Not a big deal as he can get more quickly to fill the open spaces and get the floor poured this next week then it's on to the roof steel and roofing and the walls.pklongballFeb 08, 2009
|
|
Small 50W dichroticI thought this would be a good idea for the lighting round the house in the soffit, but with 20 of them at 50W each that's too much to leave on all night. We used the 220V ones.The 12V versions one have the added expense and 50X is still 50W. We're going to change them for 5W energy saver bulbs in small recessed fittings. We're keeping the ones in the bathrooms.jazzmanFeb 08, 2009
|
|
| 7141 files on 596 page(s) |
 |
|
|
|
|
492 | |
|
|
|
|
|
|
|
