|
Last additions |
Repairing ScreenFitting the screen into place over some spots that were inadvertently missed by the ceiling installer.dozerSep 27, 2011
|
|
Above Screen SectionScreen section above the ceiling. dozerSep 27, 2011
|
|
Wood TrimWood trim installed around the columns by the ceiling guys needed to be reworked because some of the joints were not done properly. dozerSep 27, 2011
|
|
Wood Trim ExteriorWood trim installed butting up against the fascia board. dozerSep 27, 2011
|
|
Metal ScreenAn aluminum based screening material being used here. This is much more expensive than the vinyl type eventually used and not noticeably more durable. dozerSep 27, 2011
|
|
Blue Vinyl MeshingThe blue vinyl meshing being fixed into place. If there are any voids it is important to mention it and follow up and check to make sure it gets fixed because it is hard to get at later. dozerSep 27, 2011
|
|
Two Types of ScreeningTwo types of screening are installed under the smart board. The screen prevents insects entering the attic area since the smart board is vented. dozerSep 27, 2011
|
|
Affixing ScreenAffixing a piece of metal screen to the aluminum ceiling frame. dozerSep 27, 2011
|
|
Cutting Smart BoardThe smart board comes in sheets and is cut to size as needed. dozerSep 27, 2011
|
|
Aluminum Rail FrameworkInstalling the rail framework. The rails are run to form sections to support the smart board ceiling sections. The suspended framework is supported by aluminum strips affixed to the roof structure. dozerSep 27, 2011
|
|
Exterior Ceiling FrameInstalling the horizontal members of the aluminum frame on the exterior of the house. dozerSep 27, 2011
|
|
Setting in the Cross SupportsSetting the cross supports into place for the exterior ceiling.dozerSep 27, 2011
|
|
7141 files on 596 page(s) |
|
|
|
|
|
253 | |
|
|
|
|
|
|
|