|
| Last additions |
Finishing touches applied to the top of the perimeter wall foundation post.dozerSep 28, 2011
|
|
Stucco being applied to the perimeter wall.dozerSep 28, 2011
|
|
Laying a brick in place.dozerSep 28, 2011
|
|
To apply decorative tiles around a perimeter wall foundation post, the brick layer creates a rig which sits on top of the post and has 'straight-line' nylon line running down the side. (28-Jun-04)dozerSep 28, 2011
|
|
A wall section (front and side) with completed support post structures. dozerSep 28, 2011
|
|
The support post is poured around the adjacent blocks using a form structure. dozerSep 28, 2011
|
|
Another view of the back wall. dozerSep 28, 2011
|
|
This is the entry way for the walk in gate. dozerSep 28, 2011
|
|
Another shot of the blocks. Note, there is a vertical piece of rebar put in place between the blocks close to the post for every block. This metal piece is used to add strength. It is guage 2 hun full and is about 40 cm long.dozerSep 28, 2011
|
|
To add strength the blocks are cemented in place prior to pouring the supporting posts. The posts will be poured 'around' the blocks. Standard sizes for facing walls is 4 blocks high, the back sides are 7 blocks high. (24-Jan-04) dozerSep 28, 2011
|
|
Another shot showing the footing with the rebar supports at 2.5 meter intervals. dozerSep 28, 2011
|
|
The footing will have the rebar supports at 2.5 meter intervals. dozerSep 28, 2011
|
|
| 7141 files on 596 page(s) |
 |
|
|
|
|
165 | |
|
|
|
|
|
|
|
