|
Last additions - Electrical |
Switch Box + Power PointThe switch boxes are 50 centimeters from the ground and the switch boxes are 120 centimeters from the ground. The conduit is affixed to the boxes with plastic nuts which hold it in place. dozerSep 27, 2011
|
|
In wall power point boxThe metal boxes are used within the walls but the same tight conduit connections are made with the screw fit connectors.dozerSep 27, 2011
|
|
Electric Joint BoxThe yellow PVC boxes are used to route the wire coming up from the wall. A clean connection is made with the screw in connectors. dozerSep 27, 2011
|
|
Location of Electrical Breaker PanelThis is the front right side of the house as you go in through the front door. Note the cluster of yellow PVC electrical conduit to the right of the glass blocks. This is where the electric breaker panel will be located.dozerSep 27, 2011
|
|
Electric RoutingSecuring the electric into place prior to the pouring of the concrete floor.
dozerSep 27, 2011
|
|
Conduit PathThe electrical conduit will run in the floor and also vertically in designated hollow cinder blocks.
dozerSep 27, 2011
|
|
ConduitThe electrical conduit will run within a designated empty hole within the cinderblock.
dozerSep 27, 2011
|
|
Power Point OpeningAn opening for a 4 receptacle power point in a designated empty hole within the load bearing wall.
dozerSep 27, 2011
|
|
Conduit SystemThe conduit screw affixes snuggly into the receptacle box.
dozerSep 27, 2011
|
|
Power Point BoxThe power point box secured in place with cement.
dozerSep 27, 2011
|
|
Power points with 4 grounded receptacles will be used throughout the house.
dozerSep 27, 2011
|
|
External Switch PanelThe black box is for a external (outside) switch panel. The switch panels on the outside are at a height of appx. 1.2 meters.
dozerSep 27, 2011
|
|
|
|
|
|