|
Last additions - Roof Structure |
Primed and Painted Roof MetalEach piece of roof metal is painted first with a primer coat and then sealed for maximum rust protection. This is a precaution which should be taken since the integrity of the metal is important in regards to the strength of the roof structure.dozerSep 27, 2011
|
|
Example Roof TrussA roof truss from a different project. We will be using a modification of this with a 'm' truss design. The shot is notable, because normally a 'truss' system is not used here. With foundation columns and internal walls, the roof structure is normally dependent on being able to be supported within the house boundaries, ie not a truss.
dozerSep 27, 2011
|
|
Metal Welding SurfaceA piece of metal will be secured in place around the top of the top horizontal beam to provide a surface for welding on the roof structure.
dozerSep 27, 2011
|
|
Heavy Metal Box ConstructionThe metal used in the critical elements of the roof structure is 4" x 2" box section which is 3.2 mm thick of the heaviest grade of metal (heavy duty).
dozerSep 27, 2011
|
|
Exterior of Roof Structure1 inch square metal is used as a surface on which to lay the tiles.
dozerSep 27, 2011
|
|
'M' Truss SectionThe truss sections are in a 'M' formation, which will give adequate support for the roof tiles across a 7 meter span.
dozerSep 27, 2011
|
|
|
|
|
|
|
|