|
Last additions - Welding Projects |
Bunk Bed Bolt AttachmentsThe brackets which allow the bunk bed to be assembled/disassembled with bolts. dozerSep 27, 2011
|
|
Security MetalThe welder used guides to ensure the spacing between the vertical bars was consistent. The long 1 by 1 is used as a horizontal guide. The work turned out very straight. dozerSep 27, 2011
|
|
HeadboardPainting a head board just welded with the foot board visible behind it. dozerSep 27, 2011
|
|
Shelving for StorageOK, not actually anything welded, but they did cut, assemble and put together several sets of shelving. dozerSep 27, 2011
|
|
Metal Roof on Storage ShedThis metal roof was welded on this storage shed after the old corrugated roofing became problematic. dozerSep 27, 2011
|
|
Storage CabinetsWelded together several of these storage cabinets with the exterior being metal mesh. The design using mesh allows stuff to be hung on from the mesh with U hooks. dozerSep 27, 2011
|
|
Storage CabinetThe frame of the cabinet prior to attaching the wood shelving and latches. dozerSep 27, 2011
|
|
Working on a GateFabricating one panel for a gate. dozerSep 27, 2011
|
|
Security MetalWelding security metal in place. dozerSep 27, 2011
|
|
Coming up with Curved PieceThe curved pieces of security metal are purchased already curved. Here the welder is curving a piece (from a straight one) since we had run out of the curved ones.dozerSep 27, 2011
|
|
Working on Metal CabinetThe metal cabinet in the process of being welded - not sure what the hammer is for. dozerSep 27, 2011
|
|
CabinetOne cabinet at the beginning. We had him do several of these, used for storage. dozerSep 27, 2011
|
|
|
|
|
|