Lifting Mural into Place24 viewsLifting the engraving into place. dozer
Desk Fitting24 viewsThe installer adjusting the cut and edged granite to have the same overhang on all sides. dozer
Satillite Tower24 viewsThe completed satellite tower with the dish on top.dozer
Bed24 viewsA single bed as fabricated by the welder. The side rails can be unbolted and it can be disassembled as required. dozer
Working on a Gate24 viewsFabricating one panel for a gate. dozer
Storage Cabinets24 viewsWelded together several of these storage cabinets with the exterior being metal mesh. The design using mesh allows stuff to be hung on from the mesh with U hooks. dozer
Headboard24 viewsPainting a head board just welded with the foot board visible behind it. dozer
Hooking Up a LAN Connection Point24 viewsThe original cctv installation crew works on getting a LAN connection point working. It took them a while but they finally got it going. dozer
Silicone Adhesive23 viewsUsing sony brand silicone adhesive to glue the granite top to the desk. dozer
Coming up with Curved Piece23 viewsThe curved pieces of security metal are purchased already curved. Here the welder is curving a piece (from a straight one) since we had run out of the curved ones.dozer
Raceway for Electric Wire23 viewsThis is the plastic raceway to cover the electric wire running to the 12V DC UPS system which supports the electric for several cameras. dozer
Wire Covered with Cable Raceway23 viewsWhere we did not run the cable under the surface a cable cover was used.dozer