|

Most viewed - House Construction |

Ridges Laid in Place93 viewsThe ridge tiles are laid in place over a waterproofed (via Sika) concrete mix. Note that the exposed concrete will still need to be treated with a exterior coat of waterproofing agent. The other method is dry tech, which is not used here. dozer
|
|

Wire Mesh92 viewsClose up of wire mesh which is affixed using a nail and washer. It is used near the corner to keep cracking and separation problems to a minimum. dozer
|
|

Electric Switch Diagram92 viewsOne of the electric diagrams showing an overview of the switch scheme, there we also detail diagrams for switches and another set for plugs. dozer
|
|

Double Box Sections92 viewsThe exterior of the roof structure was done with double box sections of 3.2mm 2x4.dozer
|
|

Wood Trim for Ceiling Finish92 viewsThese teak wood trim pieces have a 90 % fitting to allow them to be easily applied to a corner, as in this application. They are lacquered with several coats prior to being affixed in place. At the joints a matching 45 % cut is made so they but up to each other with no joint being apparent. dozer
|
|

Aluminum Door Installation92 viewsThe doors are installed in the pre measured opening. If there is any modification needed to the opening it is done by the aluminum window installers. dozer
|
|

Laying Aerated Block92 viewsAerated blocks are not mortared in a convention sense. They are basically glued together (using the designated product) and kept secure by tying them into the columns with 6mm rebar which has been drilled into the column. A groove is cut in the block to hold the rebar in place. dozer
|
|

More soffit structure + facia92 viewsShows the soffit structure including the cross sections and also the facia boards. dozer
|
|

Dividing Panel92 viewsThe dividing panel for the shower enclosure likewise has colored glass blocks to give more of an open feel. dozer
|
|

CPAC Roof Tile Engineer91 viewsThe tiling engineer from the company to do the roof tiling measuring and checking the roof structure so far. As they only lay down the tiles they must check that the roof structure is straight and able to hold the tile load. dozer
|
|

Cutting the Rafters91 viewsA guide line is used to ensure the rafters are cut at the proper point. dozer
|
|

Dry Tech at the Ridge Corner91 viewsThe final layer of dry tech material being laid in place at the ridge corner. dozer
|
|
943 files on 79 page(s) |
 |
 |
 |
 |
 |
32 |  |
 |
 |
 |
|

|
|
|