|
Most viewed - Structure |
Footing and Column Framework156 viewsThe footing frame and the column framework in place. Spacers are at the bottom and side. dozer
|
|
Footing Frame138 viewsThe footing frame in place with 5 cm. spacers on the bottom and the upright rebar indicating the center of the footing. dozer
|
|
Support Column136 viewsThe part of the column above the footing and below the ground.dozer
|
|
Corner Framework129 viewsCorner section showing beam rebar intersection with the column. dozer
|
|
Footing128 viewsFinishing off the top of one particular footing, height of 35 cm. dozer
|
|
Ground Beam128 viewsThe rebar framework for the ground beam. The beams were 40 cm by 20 cm wide. The beams will sit on top of the existing soil level and the floor will sit on top of the beams. dozer
|
|
Poured Support Column124 viewsA poured support column (the part of the column under the floor). The guide lines are visible which indicate where the middle of each column should be. dozer
|
|
Form work for Ground Beam122 viewsCinder block formwork for the ground beam with wood on the outside. dozer
|
|
Damp Course put in Place122 viewsUsing a heavier plastic that doesn't tear easy like the saran wrap type ones normally used. This is designed to keep moisture from seeping into materials above it. In addition a waterproofing agent is used on the floor pour.dozer
|
|
Poured Ring Beam121 viewsA poured ring beam with U shaped rebar to keep it in place. This is in a section that used 20 cm. thick wall. dozer
|
|
Beam and Column Intersection117 viewsThe beam and column are contiguous rebar that will be concreted in place. dozer
|
|
Form work for Ground Beam117 viewsStarting the form work for the ground beam. On the inside it will be cinder block and on the other side it will be form wood (which is removed after the pour).dozer
|
|
|
|
|
|