|
| Last additions - House Construction |
Heavy Metal Box ConstructionThe metal used in the critical elements of the roof structure is 4" x 2" box section which is 3.2 mm thick of the heaviest grade of metal (heavy duty).
dozerSep 27, 2011
|
|
Exterior of Roof Structure1 inch square metal is used as a surface on which to lay the tiles.
dozerSep 27, 2011
|
|
'M' Truss SectionThe truss sections are in a 'M' formation, which will give adequate support for the roof tiles across a 7 meter span.
dozerSep 27, 2011
|
|
Cinderblocks used as Supports for Ground BeamSmall cinder blocks are used as permanent supports (on the inside) for the ground beam. These will remain as a part of the foundation after the ground beam is poured.
dozerSep 27, 2011
|
|
Interior WallThe start of the interior wall laying process. dozerSep 27, 2011
|
|
Horizontal Wall BeamA horizontal concrete beam right after being poured.dozerSep 27, 2011
|
|
Interior Brick workRed bricks are used on the interior walls, which when affixed with concrete are much stronger than the regular cinder blocks.dozerSep 27, 2011
|
|
Internal Wall intermediate BeamsThe interior walls have two horizontal intermediate concrete beams for strength. dozerSep 27, 2011
|
|
Depth IndicatorA depth of render indicator is plastered in place prior to render application. This is used to determine the thickness of the render to be applied. dozerSep 27, 2011
|
|
Front of HouseThe non consistency of the external render color coat gives a homey feel to the project.dozerSep 27, 2011
|
|
External Color Render ApplicationThe external color render is applied over a rough dry coat of non color render. dozerSep 27, 2011
|
|
Render BrushThe brush is used during the render application to sprinkle water on the render as it is starting to dry, then it is polished with a cement trowel.dozerSep 27, 2011
|
|
| 943 files on 79 page(s) |
|
|
|
|
|
33 | |
|
|
|
|
|
|
|
