|
Last additions - Structure |
Column EdgingThe columns are edged showing their outline, here pictured in a wall that has been rendered but yet to be painted.dozerSep 26, 2011
|
|
Rendering with SpongeA sponge is used to get the final finish on the wall.dozerSep 26, 2011
|
|
Brooming the WallThe brooming is used as the final step to get the finish on the wall.dozerSep 26, 2011
|
|
Wood TrowelThe wood trowel is used after the straightedge tool to start getting a smooth finish.dozerSep 26, 2011
|
|
Straight EdgeThe straight edge tool is used on the rough wall as the first step after the render has been applied.dozerSep 26, 2011
|
|
Cornering The ColumnThe straight edge is used to create the square corner on the column. dozerSep 26, 2011
|
|
Squaring a BeamThe window opening is squared using a straight edge tool. dozerSep 26, 2011
|
|
Wire Mesh Applied to CornerWire mesh is affixed to corner areas prior to rendering to prevent cracking. dozerSep 26, 2011
|
|
Wire MeshClose up of wire mesh which is affixed using a nail and washer. It is used near the corner to keep cracking and separation problems to a minimum. dozerSep 26, 2011
|
|
Wire Mesh After Corner AddedThe wire mesh partially embedded in render after the corner has been squared. dozerSep 26, 2011
|
|
Rear ExteriorShowing ring beams extending below and above window openings. dozerSep 26, 2011
|
|
Form Work for LintelThe form work for a lintel/ring beam. There are U shaped pieces of 12 mm rebar used to ensure that the forms don't spread out when the concrete is poured. dozerSep 26, 2011
|
|
|
|
|
|